Question: How Do You Hang A Valance Without A Rod?

Where should drapery rods be placed?

How Height Impacts Curtain Rod PlacementFor standard drapes that hang on either side of a window, the typical height is halfway between the top of the window casing and the ceiling.

For cathedral ceilings, leave approximately four to six inches above the window trim as a guideline.More items…•.

How do you keep a scarf valance from slipping?

You could also use long push-pins to secure the fabric to the rod. Keep the swag from slipping by attaching the underside of the valance to the top of the rod with two-sided tape.

Do you need two curtain rods to hang a valance?

We recommend using two single curtain rods of 1″ – 2″ in diameter: the top one is for the valance with swags and tails, and the lower one for the two curtain panels. This way, you have more flexibility in adjusting height, width and projection (distance from the wall).

What can I use instead of a valance?

Tablecloth Linens. A crafty homeowner can whip up a window treatment with any textile—even table linens! Debbie from Debbie Doo’s took pretty cloth napkins and hung them from a rod using curtain clips. The result is an easy and cheerful alternative to a traditional valance.

How do you fix a curtain without a rod?

Coat Hooks To install them, intersperse the coat hooks at an even distance across the window. Loop the holes through each hook to hang your curtains. Coat hooks are easier to hang than traditional curtain rod hardware and don’t require drilling.

Can Command hooks hold curtain rods?

Reusing them is as easy as applying a Command™ Refill Strip, so you can take down, move and reuse them again and again! Great for installing curtain rods or hanging wall décor, coats, and bags! Use with rod diameter less than 5/8 in, length less than 48 in, and finial greater than 3/4 in.

How far down should a valance hang?

Another rule of thumb used by decorators is that the window valance depth should be 1/4 of the overall window height, plus 1 inch. A 60-inch tall window, then, would call for a 16-inch deep valance, while a 48-inch window calls for a valance about 13 inches deep.

How much wider Should a Valance be than the window?

Most valances should only be 1-1/2 to 5 inches wider than the window if the valance hangs by itself or over a Roman shade. It should be 10 to 30 inches wider than the window if it’s hung over a pair of custom drapes. If the valance is gathered, its total, flat width should be 2 to 3.5 times the width of the window.

Why use a double curtain rod?

When used together, this layer of drapes gives the window and room a very distinct look. The best way to ensure that both drapes look and hang correctly is to use a double curtain rod. A double curtain rod allows the drapes to serve their purpose while keeping things nice and clean looking.

How do you hang a valance without a curtain rod?

Hang a valance without a curtain rod –use adhesive Velcro and attach to top of blinds.

How do you hang double curtains without a double rod?

There are several different methods you can use to hang your double curtains up without a double rod. These methods include using a bungee cord, curtain rings, or even coat hooks!