Quick Answer: How Do I Choose Curtain Width?

How much fullness do you need for eyelet curtains?

CURTAIN STYLEFULLNESS RATIOEyelet Curtains1.35 – 1.55 depending on Eyelet positioningRod Pocket Curtains1.00Flat Curtain Panel1.00Wave Curtains2.25 more rows.

How many curtain panels do I need for one window?

Determine the number of panels you need to order: ~ Multiply window width by 1.5 to 2 if you want curtains loosely gathered for a relaxed, tailored look. Divide your total by the width of a single curtain panel to get the number of panels you need.

How do you choose curtain size?

Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.

What is the best width for curtains?

Curtain widths should typically be about 1 1/2 to 3 times the final width measurement of your window. However, the fullness you choose will ultimately define the style you want to achieve. Fuller curtains lend a richer feel to your windows while curtains with a shorter width create a more tailored look.

Should curtains touch the floor in a bedroom?

The short and easy answer is that your curtains your be floor length. They should be long enough to just barely touch the floor, but not so long that they drag on the floor or bunch up in a pile. It is a common mistake to make your curtains so long that they make piles of curtain when opened fully.

Do eyelet curtains need to be double width?

You need to allow for both flat panels to be a minimum of one and a half times the curtain pole width. I personally think they look much better at double the pole width. … To work out the length (drop) for your new eyelet curtains. you will need to hold the tape measure at the top edge of the curtain pole.

How high do you hang 84 inch curtains?

When you buy them in stores or online, there are two standard lengths: 84 inches and 95 or 96 inches. The length of the curtain dictates the height of the rod. If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings.

How wide should curtains be for 60 inch window?

Example: For a 60-inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42 inches wide.

How wide should curtains be for 72 inch window?

To get the measurements, measure the width of the rod from left to right. For instance, if your window measures 72” wide, you will need curtains that will give a maximum width of 144” (window width x 2 = 144”.)

Is the width of a curtain per Curtain?

The size given refers to each individual curtain, so if you buy a pair of curtains measuring 117cm x 137cm (46″ x 54″) you will receive two curtains each with the same measurement of width 117cm x length 137cm (width 46″ x length 54″).

What are standard curtain widths?

It can vary from 50″ up to 58″, and some fabrics, especially sheers, can some in double width at 108″ wide. But the standard in the U.S. is 54″. So, if you think about a regular size window which is 30″-36″ wide, one width of fabric is only 20 or so inches wider than the window.

How wide should your curtain rod be?

Width Considerations As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.

How much width of fabric do I need for curtains?

Fabric calculations – Most curtains will require somewhere between 1 ½ and 2 ½ times fullness, depending on the heading and look you want to achieve. I always prefer to be generous and use 2 ½ times the width, skimpy curtains don’t look good and you can always use any extra fabric for cushions or tie backs.

What is the widest width of ready made curtains?

90 inch wide90 inch wide curtain tend to be the widest width available in ready made curtains, and so will fit most larger and patio windows. This makes it easy for you to find matching curtains for every window in your home.

How wide should curtains be for 100 inch window?

For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.

How do you measure for blackout curtains?

Add 15 percent or 25 percent to the base width of the window for the finished drapery width. For example, if the base width of the window is 60 inches and the drape is blackout-lined, the finished drape must be a minimum of 75 inches wide to expose the entire window when the drape is open.